Shanghai Gokai Industry Co,.Ltd.
Call Us: +86-18918606548
Call Us: +86-18918606548
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 222 Author: Gokai Publish Time: 2026-04-15 Origin: Site
Plexiglass (acrylic sheet) scratches more easily than glass—but with the right tools and technique, you can often restore it to a clear, glossy finish instead of replacing the panel. As an OEM acrylic sheet supplier at Gokai, I've spent years helping global customers troubleshoot scratched guards, displays, machine covers, and signs, and the same field‑tested principles apply whether you're restoring a small DIY window or a large industrial panel. [acrylite]
Plexiglass is a common name for acrylic sheet (PMMA), the same family of materials also sold under brands like Perspex, Lucite, and ACRYLITE. Compared with glass, acrylic offers higher impact resistance, lower weight, and excellent optical clarity—up to about 92% light transmission in clear grades. [fabglassandmirror]
However, acrylic's surface is softer than glass and polycarbonate, so micro‑abrasions from dust, paper towels, or harsh cleaners can quickly turn a clear sheet hazy if it is not maintained properly. The good news is that these surface scratches are usually *repairable* with mild abrasives and polishing, as long as you stay within safe depth limits. [acmeplastics]
Before you start sanding or polishing, you need to know what kind of damage you're dealing with, because the wrong approach can make acrylic look worse. [delviesplastics]
- Light scratch: You can see a mark, but your fingernail barely catches or does not catch at all when you slide it across the scratch.
- Moderate scratch: Your fingernail clearly catches, but the groove appears shallow (generally under about 5 mm deep).
- Deep scratch / gouge: The groove is visually obvious from all angles, your fingernail sinks in, and the depth is around or over 5 mm.
In our production support work at Gokai, we treat 5 mm as the practical limit: once the damage is deeper than this, the material removal required to level the surface risks optical distortion, local thinning, or heat damage.
If the "scratches" appeared soon after using glass cleaner, alcohol, or strong chemicals, you might be seeing crazing—a web of micro‑cracks inside or on the surface caused by chemical stress. Crazing usually looks like fine, branching lines rather than clean, single scratches and is much harder to restore perfectly; often the most cost‑effective solution is replacement instead of aggressive grinding. [acrylite]
Based on field experience and manufacturer guidance, an effective scratch‑removal kit for plexiglass should include: [acmeplastics]
- Acrylic‑safe cleaner (for example, Novus No. 1 or a mild dish soap solution)
- Acrylic polishes / scratch removers
- Novus No. 2 for fine scratches and haziness
- Novus No. 3 for heavier abrasions before final polishing [tapplastics]
- Wet‑and‑dry sandpaper in graded steps: 600, 800, and 1200 grit
- Soft, lint‑free cloths (microfiber or soft cotton)
- Clean water for rinsing and wet sanding
From the user side, many DIYers and professionals also report good results with products like PlastX or Plexus plastic cleaners when combined with microfiber towels and patient circular buffing, especially for light wear on windows and windscreens. [reddit]
Never start polishing a dirty panel. Tiny particles trapped under a cloth or pad will create new concentric scratches while you're trying to fix the old ones. [delviesplastics]
Safe cleaning procedure
1. Rinse the acrylic with lukewarm water to remove loose dust. [acrylite]
2. Prepare a solution of mild soap or an acrylic‑approved cleaner. [acmeplastics]
3. Wipe gently with a soft microfiber cloth, using only light pressure. [delviesplastics]
4. Rinse thoroughly with clean water to remove any residue. [acrylite]
5. Blot or gently wipe dry with a fresh, soft cloth; do not use paper towels. [delviesplastics]
At Gokai, we advise our OEM customers to standardize this cleaning procedure in their maintenance manuals to reduce unnecessary scratching during routine cleaning. [delviesplastics]
Light surface scratches from everyday use are the most common and the easiest to fix. Often you can restore clarity using only polish and a soft cloth, with or without very fine sanding. [acmeplastics]
Use this when the scratch is visible only under certain angles or close inspection.
1. Make sure the panel is cleaned and dried as described above. [acrylite]
2. Apply a small amount of acrylic polish (e.g., Novus No. 2) directly to the scratched area. [tapplastics]
3. Using a clean microfiber cloth, buff in small circular motions with moderate, even pressure. [delviesplastics]
4. Continue for several minutes; do not panic if you do not see instant results—polishing is gradual.
5. Wipe off the residue with a clean cloth and inspect the surface under good lighting.
6. Repeat if necessary until the scratch is no longer visible in typical use conditions.
Users who reviewed similar plastic polishes consistently emphasize patience and repeated passes rather than pressing harder, which risks creating swirl marks. [mypilotstore]
If you still see visible marks after polish‑only treatment, add 800–1200 grit wet sanding: [acplasticsinc]
1. Wet 800‑grit sandpaper and sand the scratched area in gentle circular motions. [acplasticsinc]
2. Switch to dry 800‑grit and repeat the same small area. [acplasticsinc]
3. Alternate wet and dry for around 3 minutes; the surface may appear dull—that is expected. [acplasticsinc]
4. Wet 1200‑grit paper and lightly sand in circles to refine the scratches. [acplasticsinc]
5. Follow with dry 1200‑grit until the sanding pattern looks uniform.
6. Wipe away all residue with a clean, dry cloth (a dirty cloth can re‑scratch the surface).
7. Apply Novus No. 2 or similar polish and buff as in Method A until gloss returns. [tapplastics]
From a supplier standpoint, we recommend masking off surrounding clear areas with low‑tack tape so you limit sanding to the damaged zone and reduce the risk of visual "patches." This approach is frequently used in restoring machine guards and display windows. [delviesplastics]
Moderate scratches need more material removal, so the process starts with coarser 600‑grit paper and then steps up to finer grits and polishes. [plasti]
Tools you'll need
- 600, 800, 1200‑grit wet‑and‑dry sandpaper
- Full Novus system or equivalent (1, 2, 3) [tapplastics]
- Clean microfiber cloths
Procedure for scratches under about 5 mm deep
1. Clean the sheet thoroughly and dry it. [acrylite]
2. Wet 600‑grit paper and sand the scratched area in circular motions. [acplasticsinc]
3. Switch to dry 600‑grit and repeat the same zone; alternate wet and dry for roughly 4 minutes. [acplasticsinc]
4. Move to 800‑grit and repeat the alternating wet/dry cycle for about 3 minutes. [acplasticsinc]
5. Finish sanding with 1200‑grit, again alternating wet and dry until the surface is smooth and uniformly matte. [acplasticsinc]
6. Wipe away all dust and slurry with a clean, dry cloth.
7. Apply a heavier abrasive polish such as Novus No. 3; buff firmly in back‑and‑forth strokes until the surface begins to clear. [tapplastics]
8. Remove all residue and then apply Novus No. 2 to refine the gloss. [tapplastics]
9. Finish with Novus No. 1 or a similar plastic cleaner for a static‑reduced, high‑clarity surface. [tapplastics]
Specialty plastic shops sometimes use powered polishers and wool pads for large areas, but these tools can easily overheat and "burn" acrylic if held in one spot or run at excessive speed. For most DIY and light industrial tasks, manual sanding and hand‑polishing are safer, especially for clear panels where distortion is unacceptable. [plasti]
There are limits to what scratch removal can achieve. In our experience supplying acrylic sheets to demanding OEMs, we recommend replacement in these situations: [delviesplastics]
- Deep gouges over about 5 mm that catch the nail strongly and are visible from every angle.
- Cracks that travel through the sheet, especially around fastener holes or bends.
- Severe crazing after chemical exposure, where micro‑cracks cover a wide area. [acrylite]
- Safety‑critical applications (e.g., machine guards, protective shields) where structural integrity might be compromised. [delviesplastics]
Repairing these defects may require removing so much material that thickness and strength are reduced, and even then optical quality is rarely restored to "like new." In such cases, a fresh cut‑to‑size acrylic sheet or even a stronger plastic like polycarbonate is the more reliable long‑term solution. Gokai can supply OEM‑grade acrylic and polycarbonate sheets precisely cut and machined to your drawings for quick replacement. [printsafari]
In many projects we support, the best cost savings do not come from repair, but from preventing scratches from happening again. [delviesplastics]
Best‑practice care tips
- Use only acrylic‑safe cleaners—mild soap, dedicated acrylic cleaners, or products recommended by the sheet manufacturer. [acrylite]
- Avoid ammonia‑based glass cleaners, alcohol, and strong solvents unless specifically approved; these can trigger crazing and stress cracking. [acmeplastics]
- Clean with soft microfiber cloths; avoid paper towels, abrasive pads, or dry dusting. [acrylite]
- Keep protective films on OEM panels as long as possible during fabrication and installation. [delviesplastics]
- For high‑traffic surfaces, consider hard‑coated or thicker acrylic or polycarbonate to increase life and scratch resistance. [fabglassandmirror]
From an OEM supplier perspective, documenting these care rules in installation and maintenance manuals dramatically reduces warranty claims and keeps display quality high over the lifetime of the product. [delviesplastics]
Working with global customers in signage, machinery, transportation, and architecture, we see the same patterns in successful scratch management.
- Match repair effort to application: A tiny remaining mark may be acceptable on a warehouse guard, but not on a luxury retail showcase or medical device cover. [delviesplastics]
- Standardize sanding steps: Train technicians to move through 600 → 800 → 1200 grit, never skipping stages, to avoid persistent sanding marks. [acplasticsinc]
- Control environment: Always work in clean, dust‑controlled conditions; airborne grit can undo your polishing work in minutes. [delviesplastics]
- Specify material properly: For projects where scratch resistance is critical, choose cast acrylic with higher surface hardness or coated grades instead of basic extruded sheet. [printsafari]
Gokai can provide OEM‑level guidance on sheet selection (cast vs. extruded, clear vs. coated), thickness optimization, and fabrication to reduce the risk of scratches from the design phase onward.
If you are restoring a critical or high‑value part—for example, a machine guard, medical panel, or a large architectural window—DIY repair may not be the safest or most economical option. An expert OEM can assess whether repair, re‑fabrication, or a different material (such as coated acrylic or polycarbonate) is the best route. [fabglassandmirror]
At Gokai, we support:
- Global OEM customers with custom‑cut acrylic sheets, CNC machining, polishing, and bending.
- Material upgrades if your current panels scratch too easily in real‑world use.
- Technical guidance on cleaning, maintenance, and scratch‑removal procedures tailored to your industry (signage, retail, industrial, construction, etc.).
If you need replacement acrylic sheets or OEM‑grade panels after evaluating your scratches, or want to upgrade to better‑performing materials, get in touch with the Gokai team for tailored recommendations and quotes.
1. Can I use regular glass cleaner to remove scratches from acrylic?
No. Most glass cleaners contain ammonia or alcohol that can cause crazing and stress cracking in acrylic instead of fixing scratches. Use acrylic‑safe cleaners or mild soap and water. [acmeplastics]
2. Will sanding make my acrylic cloudy permanently?
Acrylic will look cloudy immediately after sanding because the surface is microscopically rough, but if you progressively move from coarser to finer grits and finish with polish, you can usually restore clarity. [plasti]
3. Is there a quick product that removes light scratches without sanding?
For light wear, many users and manufacturers recommend acrylic polishes such as Novus No. 2 or similar plastic polishes, applied with a microfiber cloth in circular motions. Short, repeated sessions are more effective than aggressive pressure. [youtube]
4. How do I know if a scratch is too deep to repair?
If your fingernail sinks deeply into the groove and the depth is around or above 5 mm, significant material removal would be needed and you risk distortion or thinning; in those cases, replacement is usually recommended.
5. Is polycarbonate better than acrylic if I want fewer scratches?
Polycarbonate is generally stronger and more impact‑resistant than acrylic, but its surface can scratch easily unless it has a hard coating. If surface appearance is critical, you must choose the right grade and specify proper coatings and care instructions from the start. [printsafari]
1. Acme Plastics – "How to Remove Scratches from Plexiglass / Acrylic" (original how‑to guide and procedures).
https://www.acmeplastics.com/content/how-to-remove-scratches-from-plexiglass/
2. ACRYLITE – "Care & Maintenance" (official recommendations for cleaning acrylic sheet).
https://www.acrylite.co/resources/knowledge-base/article/what-recommendations-do-you-have-for-the-caring-and-cleaning-of-acrylic [acrylite]
3. Acme Plastics – "How to Clean and Maintain Plexiglass Acrylic" (product and care notes including fine scratch removal).
https://www.acmeplastics.com/content/acrylic-cleaning-maintenance-tips/ [acmeplastics]
4. TAP Plastics – "Novus Cleaner, Polish, and Scratch Remover" (technical usage notes on Novus 1, 2, and 3).
https://www.tapplastics.com/product/plastics/plastic_repair/novus_plastic_polishes/428 [tapplastics]
5. Plastica – "How to repair a scratch on a plexiglass, PETG or a Lexan?" (step‑by‑step sanding and Novus use).
https://www.plasti.ca/post/how-to-repair-a-scratch-on-a-plexiglass-petg-or-a-lexan [plasti]
6. A&C Plastics – "How to Remove Scratches from Acrylic" (additional sanding and polishing guidance).
https://www.acplasticsinc.com/informationcenter/r/remove-scratches-from-acrylic [acplasticsinc]
7. Delvie's Plastics – "The Complete Guide to Maintaining and Protecting Acrylic Plexiglass Sheets" (maintenance best practices).
https://delviesplastics.com/blogs/tips-and-tricks/the-complete-guide-to-maintaining-and-protecting-acrylic-plexiglass-sheets [delviesplastics]
8. Fab Glass and Mirror – "Plexiglass vs. Acrylic Sheets – Key Differences & Buying Guide" (material properties and comparisons).
https://www.fabglassandmirror.com/blog/plexiglass-vs-acrylic-sheets/ [fabglassandmirror]
9. PrintSafari – "Plexiglass vs. Acrylic Signs | PrintWiki" (PMMA definitions, cast vs. extruded, performance differences).
https://www.printsafari.com/pages/printwiki/plexiglass-vs-acrylic-signs/ [printsafari]
10. User and product reviews on plastic polish and cleaner performance (real‑world experience reports).
- Reddit discussion on plexiglass scratch removal. https://www.reddit.com/r/Arcade1Up/comments/sx2l2e/how_to_remove_plexiglass_scratches/ [reddit]
- Plexus plexiglass cleaner reviews. https://www.mypilotstore.com/mypilotstore/reviews/product.asp?sku=1150 [mypilotstore]
- Rolite scratch removal system review. https://www.youtube.com/watch?v=QKP3OsQRU98 [youtube]
